“GCCS” equipment

Forms correcting information for GNSS GLONASS/GPS receivers measurements and transmits it to consumers using communications technical means. Field of application: The equipment is designed for maximum improvement in geodetic works effectiveness and can be used in the most various areas, such as: geodetic referencing; geodetic network construction and bridging; building and surveying; underground surveying; engineering…

Forms correcting information for GNSS GLONASS/GPS receivers measurements and transmits it to consumers using communications technical means.

Field of application:

The equipment is designed for maximum improvement in geodetic works effectiveness and can be used in the most various areas, such as:

geodetic referencing;
geodetic network construction and bridging;
building and surveying;
underground surveying;
engineering surveying;
geologic exploration;
topographic photography;
landmarking;
land cadaster and many other things.

Order form

Designed for the formation of correcting information for GNSS GLONASS/GPS receiver measurements and its transmission to consumers using communications technical means. “GCCS” equipment, as a base station, provides maximum effectiveness in static and dynamic photography carrying out and can be used for geodetic works provision with the purpose of highly precise definition of coordinates in real-time mode and postprocessing.

When working with the “GCCS” equipment, the “Izyskanie” equipment made by JSC “RIRT”, or analogous geodetic GNSS GLONASS/GPS receivers, can be used as a rover.

“GCCS” equipment solves the following tasks:

producing and transmitting geodetic correcting info for photography provision in RTK mode;
producing and transmitting differential corrections for standard differential mode realization;
transmitting correcting info via GSM-modem;
GNSS data registering for further postprocessing.

The number of signals receive channels ST GLONASS/GPS	36
RMS error of definition regarding coordinates in postprocessing mode, cm, no more than:
— in plan	1+110^-6D
— on altitude	1+1.510^-6D
RMS error of differential coordinate definitions in real-time mode (RTCM- messages of 1 and (or) 31 types, distance less than 100 km), m, no more than:
— in plan	1
— on altitude	2
RMS error of differential and relative coordinate definitions in real-time mode (RTCM- messages of 18 and 19 types), cm, no more than:
— in plan	1+1.510^-6D
— on altitude	2+210^-6D
Correcting information output in communication link
RTCM-SC 104 format message frames	v.2.X
Embedded communications equipment	GSM — 900/1800 (2 embedded channels), the opportunity to connect ultrashort wave radio station
Information exchange with the external devices:
— interface type	RS-232C, Bluetooth, VGA, PS/2, USB
— the number of every interface channels	2;1;1;1;2
Exchange rate, bit/s	up to 115200
The rate of data registering, s	from 1to 60
Embedded memory, Mb	32 extensible (USB flash)
Power supply voltage, V:
— external DC supply	10-30
— external AC network (50 Hz)	220± 22
Power consumption, W, typical	30
The time of the receiver uninterrupted operation without battery recharging , h	up to 8
Working temperature, °С	from -30 to 50
Mass, kg, no more than:
— GCCS device	2.2
— antenna device	1
Outline dimensions, mm:
— GCCS device	230.0×240.5×65.0
— antenna device	186.0×186.0x91.5

*D – baseline length

GCCS device
Antenna device
GSM antenna (2 pcs)
Network adapter
Electronic key
Software packet
Instruments and accessories set
Mounting parts set
Set of exploitative documents